Save Money with Cloth Pads







The first pad I ever sewed

The 2nd pad I sewed

The 3rd pad I sewed

Steps to Make Your Own Reusable Cloth Pad

First off you will need to have a pattern on hand using either one of your favorite disposable cloth pads or trace around an existing cloth pad or create something all your own. There are tutorials on how to make your own cloth pad patterns on YouTube. 

You can use cardstock to make a pattern that will last much longer than regular copy paper. You could even use a cereal box, poster board, or cardboard to make your pattern. I used cardstock when I made my pattern because that is what I had on hand at the time. 

Next you will need to trace the pattern onto your fabric. I used to pin my pattern onto my fabric, which is the way I was taught to sew. But it seems easier to me with these cloth pads to trace the pattern right onto the fabric using a fabric marker and cut it out that way. 

There are many choices when it comes to fabric for cloth pads. One of the fabrics I decided on for the bottom of the pad was PUL fabric, which is short for polyurethane laminate, which is waterproof, so the liquid in the pads will not leak onto your clothing. I bought mine at Hobby Lobby using a 40% off coupon. The fabric is $12.99 per yard, but with the coupon only cost $7.99.

The next fabric I wanted to buy for our pads was Zorb material, which is a material that quickly absorbs liquid and is created and sold by Wazoodle.com. 

The Zorb that I wanted sells for $7.99 a yard, but after taking a short online survey I received a 20% discount and was able save $1.60 off that price and only paid $6.39 for the fabric. Of course there are plenty of other alternative fabrics you can use to make your core out of like flannel, terry cloth, bamboo, etc.

The next thing you will need to do is to cut out your fabric pieces for both the top and bottom of your pad, as well as the absorbent core.

The pads my daughter likes are called exposed core pads and there are plenty of YouTube tutorials on how to make these. I started out this project by making the top part of the pad or the core. 

You do this by attaching the core pieces together by sewing a 1/2 inch seam all around the core layers, but leave an opening to turn the core inside out and then stitch the opening closed. I also zigzagged a stitch down the center of the core to make sure the layers did not come apart. 

My core consisted of one layer of zorb, two layers of flannel on top and bottom of the zorb and then two layers of the fabric of my choice on the top and bottom. 


Afterwards I attached my core to the topper by centering the core carefully and pinning to the topper fabric. Then sew around the core, using a 1/4 inch seam. 

After that you will attach your backer to the core/topper piece by laying the backer fabric and topper fabric or finished sides together. Pin carefully around the edges, lining up all curves and corners. 

Leave a 2 inch turn space at any place in the pattern. I use the wing area as my turning space as I've found that works easiest. Whichever turn space you choose, make it on a straight part of the pattern. Do not leave your turn space on the ends or on the curves. Use a 1/4 inch seam to sew the topper to the backer. 

Then you will clip little triangles around your corners and curves, so the pad will lay nice and flat when you are finished. 

Ironing the pad afterwards helps tremendously and makes the pad look so nice.  

Turn the pad right side out, and run a tool along the inside edge to make sure all corners and curves are neat and fully pushed out. I use a chopstick for this step. 

Then you will pin the turn space closed and top stitch all the way around the edge of the pad, making sure to close the turn space. I use a full 1/4 inch top stitch, but you can use whatever width you add attractive and comfortable. 

Finally, you will add a closure of your choosing. We decided on a snap press in order to attach the snaps to our pads. We ended up using the following Kamsnaps press from Amazon for $28.97.

Putting the snaps on the cloth pads is pretty easy and only takes a few minutes. 

We used to spend over $50 a month on disposable pads, That was until we scheduled a doctor visit for my daughter, along with that and a few other changes, we no longer spend that much money on disposable feminine products. 

Cloth pads were a game changer for my daughter. She loves them and would never consider going back to disposables. 

If you decide to make your own cloth pads, I would love to hear about it. Send me an email at Bar2969@yahoo.com and tell me all about it.

The rest of this page will simply be a photo record of all the pads I made for my sweet Bailey.  :)

Pad # 2 ~ June 3, 2017

Pad # 3 ~ June 4, 2017


Pad # 4 ~ June 5, 2017

Pad # 5 ~ June 5, 2017

Pad # 6~ June 7, 2017
Pad # 7 ~ June 8, 2017

Pad # 8 ~ June 10, 2017
Pad # 9 ~ June 12, 2017
This sock monkey fabric was actually a bandana in it's former life. 

Pad # 10 ~ June 12, 2017
This material was a scrub shirt in its former life.
 

Pad # 11 ~ June 14, 2017
Day of the Dead
Pad # 12 ~ June 14, 2017
This material had been a scrub shi
rt.

Pad # 13 ~ June 14, 2017
Day of the Dead # 2
Pad # 14 ~ June 21, 2017
Made from a shirt from thrift store

Pad # 15 ~ June 21. 2017
COre made from Flannel Receiving Blanket


No comments :

Post a Comment

Thank you for visiting the Frugal Workshop.